• Disconnect electrical system before making
adjustments or welding on machine.
1.3.4 Chemical safety
This cab complies the EN 15695-1: 2009 Cat 4
with a filter element complying to EN 15695-2:
2009 Cat 4 which provides protection against dust,
aerosols and vapour. Follow chemical
manufacturer’s instructions.
Protection against hazardous substances
(agricultural chemicals, etc.) is not provided.
Personal protective equipment must be used
according to the chemical manufacturer’s
recommendations. A protection against dust,
aerosols and vapour (EN 15695-1: 2009 Cat 4) is
provided under the following conditions:
• The cab door is closed;
• Cab ventilation is running on maximum;
• Air filter is clean and is serviced under
maintenance interval (See Lubrication &
Maintenance Section of this manual);
• Check the Cab pressure indicator.
Fig. 27
Operators must also avoid entering or exiting cab
in treated areas.
Fig. 28
Never spray hazardous chemicals when wind is in
excess of chemical manufacturer's
recommendation. Never allow chemicals to
contact skin or eyes.
Fig. 29
WARNING:
Never put used or contaminated
personal protective equipment with
new or clean personal protective
equipment in one storage
compartment.
If hazardous chemicals come in contact with body,
wash immediately according to chemical
manufacturer's recommendations.
Select a appropriate area to fill, flush, calibrate and
decontaminate machine. Select an area where
Fig. 30
1. General
RoGator 600C
1-15
644410-1
