Agam Water Bar, Руководство пользователя

Страница: 15 / 40

EN
EN-13
4.2 Cleaning the Water Bar
To clean the unit and the upper pad, use only a damp cloth dipped in lukewarm water. To clean
the touch screen, use a dry cloth.
Do not clean the water bar with detergents, solvents or devices which may damage the surface
of the unit (i.e. steel brushes, scourers).
PLEASE NOTE!
The unit is connected to the electric power supply. Do not spill water or wet the back of the unit
with water or any other liquid.
Emptying the water container every couple of days is recommended.
4.3 Flushing the unit
Our products were delivered to your homes after having undergone rigorous quality tests. In the
fi rst few days following installation of the unit, the water may taste like „new” water. The more
the unit dispenses water, the faster the fl avor will disappear.
Flushing the hot water container:
Place a container with minimum capacity of 3 liters below the water spout. Press the
button briefl y and then the button. Wait until the hot-water dispensing is completed (about
one minute). Repeat this action.
Flushing the cold water container:
Place a container with minimum capacity of 3 liters below the water spout. Press the
button briefl y and then the
button. Wait until the cold-water dispensing is completed (about
one minute). Repeat this action.
4.4 Weekends / Vacations
For safety reasons, if you do not intend to use the water bar for one day or more, the unit must
be disconnected from power supply by removing the power plug from the socket and closing
the water supply tap for the water bar. After you have reactivated the water bar, you must wash
the containers as specifi ed in section 4.