background image

Substrate

Sand and Cement
Screed
Concrete/Brickwork

Timber 
Floorboards 

(sound and secure)

Timber Floorboards
overlaid with WBP
Plywood 

(min depth 18mm)

Timber Floating Floors

Quarry, Clay,
Glazed Tiles

Vinyl Tiles, Flooring
Grade Asphalt

(internal use only)

Underfloor Heating

Watch Points

New concrete should be
allowed to dry for at least 6
weeks, cement sand screeds 
3 weeks and cement sand
rendering 2 weeks

Must be screwed down to
joists and noggings and be
free from deflection

Countersink screws 
to 150mm centres

If deflection exists in 
floor, overlay with plywood
prior to using Fired Earth
Fleximat or install ‘bearers’
between joists*

Existing tiles must be well
fixed; any hollow spots
should be made good and
filled

Hollow or loosely fixed vinyl
tiles should be removed
along with their adhesive
residue, prime vinyl with
Fired Earth Universal
Bonding Agent*

Fit in accordance with
manufacturers instructions.
Specification may vary
according to substrate

Preparation

If dusty or porous seal
with Fired Earth Universal
Bonding Agent*

Seal with Fired Earth
Universal Bonding Agent,
overlay with Fired Earth
Fleximat (see instructions)*

Seal with Fired Earth
Universal Bonding Agent*

Seal with Universal
Bonding Agent, overlay
with Fleximat (see
instructions)*

All surfaces must be
degreased and thoroughly
cleaned to remove old 
polish residues etc

All surfaces must be
degreased and thoroughly
cleaned to remove old 
polish residues etc

Fit in accordance with
manufacturers instructions.
Specification may vary
according to substrate

NATURAL STONE TILES AND MOSAICS -

Tiles need to be dry before installation 

Adhesive

Fired Earth White 
Fastset Floor Adhesive*

Fired Earth White Fastset Floor Adhesive
with Fired Earth Flexibond added*

Fired Earth White 
Fastset Floor Adhesive*

Fired Earth White Fastset
Floor Adhesive with Fired
Earth Flexibond added*

Grout

All Fired Earth grouts are suitable*

Additive

Not required

Fired Earth Flexibond in grout*

Not required

Fired Earth Flexibond
in grout*

GLAZED, PORCELAIN AND GEOMETRIC TILES

(Thickbed Adhesive can be used for all tiles 40 x 60cm and 60 x 60cm and above) 

Adhesive

Fired Earth Flexible Fastset Adhesive*

Grout

Grey/Sandstone/Limestone*

Additive

Not required

Fired Earth Flexibond* 

(grout only)

Not required

Fired Earth Flexibond
(grout only)*

GLASS TILES

(Use Thickbed Adhesive with all 40 x 60cm and 60 x 60cm Tiles) 

Adhesive

Fired Earth White Fastset Floor Adhesive with Flexibond added*

Grout

White/Grey/Limestone*

Additive

Fired Earth Flexibond in grout*

Product Selector  1 

(cont’d)

- Adhesives, Grout and Additives

Quick reference guide

21

20

Read the instructions on the packaging of Adhesives, Grouts and Sealants very carefully. 

Notes: 

Use this table in conjunction with Fired Earth Installation guides.

Содержание Fired Earth













Отзывы: