8
Attaching the water bottle
Remove the lid from the water bottle. Position the
bottle so that the gas tube protrudes into the water
and then push the bottle up as far as it will go. Turn
the bottle as shown in the illustration until you feel
it engage. Make sure that the water bottle is firmly in
place before use.
Carbonating water
Important!
Never carbonate anything other than pure drinking water, as sugar
or other additives might cause the pressure relief valves to stick, rendering the
machine unsafe to use.
The degree of carbonation is a matter of personal
taste, so for the first few times you use the machine,
you will have to experiment until you find the degree
of carbonation that is right for you.
To carbonate the water, press the button and keep it
pressed for 3-4 seconds or until you hear a hiss as the
pressure relief valve opens. Depending on the water
temperature, this will give you a normal degree of
carbonation.
You can add more gas as desired by pressing the
button again briefly once or twice. Release the button
and wait until you hear another hiss as any excess
pressure is discharged and the water bottle is vented.
Unscrew the water bottle and enjoy your carbonated water. Store the water in
a cool place with the lid tightly screwed on to prevent the water going flat.
O54504_A6_
AGA
_Balance_manual.indd 8
2017-11-09 14:29