AGA marvel ML15WSF3 Series, Инструкции по установке, эксплуатации и обслуживанию

Страница: 5 / 93

5
avoid scratching the floor. With the assistance of
another person, lean the appliance back to access the
front leveling legs. Raise or lower the legs to the
required dimension by turning the legs. Repeat this
process for the rear by tilting the appliance forward
using caution. On a level surface check the appliance
for levelness and adjust accordingly.
The front grille screws may be loosened and the grille
adjusted to the desired height. When adjustment is
complete tighten the two front grille screws. (See Figure
5).
Model Door Style
Minimum
Height
Maximum
Height
ML(15)(24)* (S) or (G)
33 3
⁄
4
"
(85.7 cm)
34 3
⁄
4
"
(88.3 cm)
ML(15)(24)* (P) or (F)
34"
(86.4 cm)
35"
(88.9 cm)
Table A
INSTALLING YOUR APPLIANCE
!
WARNING
Electrical Shock Hazard
Do not remove
• Do not use an extension cord with this appliance. ground prong They can be
hazardous and can degrade product
performance.
•
This appliance should not, under any circumstances, be installed to an un-
grounded electrical supply.
•
Do not remove the grounding prong from the power
cord. (See Figure 3).
Figure 3
• Do not use an adapter. See Figure 4).
• Do not splash or spray water from a hose on the appliance. Doing so may cause an electrical
shock, which may result in severe injury or death.
Electrical Connection
A grounded 115 volt, 15 amp dedicated circuit is required.
This product is factory equipped with a power supply cord that has a
three-pronged, grounded plug. It must be
Figure 4 plugged into a mating grounding type receptacle in accor-
dance with the National Electrical Code and applicable local codes and ordinances (see Figure 6). If the
circuit does not have a grounding type receptacle, it is the responsibility and obligation of the customer to
provide the proper power supply. The third ground prong should not, under any circumstances, be cut or
removed.