2
HT101S Reference Manual
OVERVIEW
The HT101S from Ag-Tester is our handheld designed to interface with
various sensors found on agricultural machinery and be a complete system
diagnostic tool.
The types of sensors that can be interfaced with include:
Liquid Flow Sensors, Pressure Sensors, Motion Sensors, Shaft Speed
Sensors, Position Sensors and others.
The top section of the HT101S is the meter. The user can make
measurements including Volts, Frequency and Resistance,
The lower part of the HT101S is the diagnostic and sensor simulator center.
When used with the “In-Line” Tester TEE Harness the HT101S will monitor the Voltages supplied to the sensor, from the
display, and additionally allow the signals generated by the sensor to be checked for presence and accuracy. When
dialed to Digital or Analog Simulate, the HT101S sends simulated signals to the display allowing all the connecting cables
to be checked while verifying the Controlling Display correctly reads the signals being sent.
When used with the “Stand-Alone” Tester TEE Harness any sensor can be fully tested on the bench.
The back panel provides connections for inputs and charging along with the magnetic RAM Mount.
RAM MOUNT/ MAGNET
INPUT CONNECTOR
CHARGER INPUT
Connect the Tester TEE
Harness Here
Содержание HT101S
Страница 1: ...1 HT101S Reference Manual...
