30
USING THE LCD DISPLAY
3.4 Setting Up the IR Sensor (For TX-42P only)
Before using the remote control, the IR sensor must be positioned correctly. The IR sensor is located on the
right side of the rear of the display as illustrated below.
To set up the IR sensor, do the following:
1
Remove the two screws securing the IR sensor to the LCD display and loosen the IR sensor.
2
Unthread the cables from the cable clip.
3
Attach the IR sensor to the desired position on display using the magnets located on the sensor.
Reverse the steps to return the sensor to its original position.
IR sensor
Magnets
