13
PRODUCT DESCRIPTION
1.4 Wall Mounting Installation
To mount this display to a wall, you will have to obtain a standard
wall-mounting kit (commercially available). We recommend using
a mounting interface that complies with TUV-GS and/or UL1678
standard in North America.
To wall-mount the LCD display, screw the mounting bracket to the
VESA holes at the rear of the LCD display.
1.4.1 VESA Grid
Model Name
VESA Grid
PN-55D2, PN-55H2
400(H) x 400(V) mm
Caution:
To prevent the display from falling:
♦
For wall or ceiling installation, we recommend installing the
display with metal brackets which are commercially available.
For detailed installation instructions, refer to the guide received
with the respective bracket.
♦
To lessen the probability of injury and damage resulting from fall
of the display in case of earthquake or other natural disaster, be
sure to consult the bracket manufacturer for installation location.
MUTE
MENU
INPUT
AUDIO R IN
AUDIO L IN
AUDIO OUT
USB
EXT. SPK
TERMINAL
IR-IN
IR-OUT
RS232 IN
RS232 OUT
RJ45
RJ45
DP IN
DP OUT
DVI IN
DVI OUT
HDMI1 IN
HDMI2 IN
VGA IN
Pr
Pb
Y/CVBS
PC LINE
IN
SPEAKER
SWITCH
100-240V
50-60Hz 2.5A
400mm
400mm
Note:
♦
Avoid the wall-mounting kit to
block the ventilation holes on the
back of the display.
♦
Secure the LCD display on a
solid wall strong enough to bear
its weight.
♦
Lay a protective sheet on a table,
which was wrapped around the
display when it was packaged,
beneath the screen surface so as
not to scratch the screen face.
♦
Ensure you have all accessories
for mounting this display (wall
mount, ceiling mount, table
stand, etc).
♦
Follow the instructions that
come with the base mounting
kit. Failure to follow correct
mounting procedures could result
in damage to the equipment or
injury to the user or installer.
Product warranty does not cover
damage caused by improper
installation.
♦
For the wall-mounting kit, use
M6 mounting screws (having
a length 10 mm longer than
the thickness of the mounting
bracket) and tighten them
securely.
♦
Unit without base weight: PN-55D2/
PN-55H2 = 24.4 kg. The equipment
and its associated mounting means
still remain secure during the test.
For use only with UL Listed Wall
Mount Bracket with minimum
weight/load: PN-55D2/PN-55H2 =
32.3 kg.
