10
PRODUCT DESCRIPTION
1.5.3 Input/Output Terminals
1.5.2 Using the Remote Sensor and Power Status Indicator
1
AC IN
AC power input.
2
Main power switch
Switch the main power on/off.
3
RS232 IN
Connect RS232 input from external equipment.
4
IR OUT
IR signal output for the loop-through function.
5
LAN
LAN control function for the use of remote
control signal from the control center.
6
HDMI1/HDMI2/HDMI3 IN
Connect HDMI signals input.
7
D-Sub IN
Connect VGA signals input.
8
AUDIO IN
Connect audio signals input (3.5 mm Stereo
Audio Jack).
9
USB 2.0
Connect USB 2.0 for service and media
playback.
10
AUDIO OUT
Connect audio signals output (RCA Stereo
Audio Jack).
11
SECURITY LOCK
Used for security and theft prevention.
• If you want to obtain a better reception of remote control function, please adjust the indicator location to
easily check the power status indicator.
• If you want to mount the display to the wall, please push the indicator switch inward before installation.
•
When adjusting the indicator location, make sure to push/pull the indicator switch firmly until it clicks into
place.
Push outward to
reveal the indicator
Pull inward to hide
the indicator
HDMI 2
RS-232C IN
HDMI 3
IR OUT
LAN
USB
MEMORY
HDMI 1
AUDIO
IN
AUDIO
OUT
D-sub
IN
1
2
3
5
4
6
11
6
7
10
8
9
