AG Neovo PD Series, Руководство пользователя

Страница: 69 / 80

65
6.1 Warning Messages
Warning Messages Cause Solution
Cannot display this video mode
The resolution or the refresh rate of
the graphics card of the computer
is set too high. • Change the resolution or the
refresh rate of the graphics
card.
No signal
The LCD display cannot detect the
input source signal. • Check if the input source is
turned ON.
• Check if the signal cable is
properly connected.
• Check if any pin inside the
cable connector is twisted or
broken.
Local KB lock
The operation using the control
panel buttons has been locked by
the user. • Disable the Local KB lock
function. Refer to page 56.
RC lock
The operation using the remote
control buttons has been locked by
the user. • Disable the RC lock function.
Refer to page 57.
CHAPTER 6: APPENDIX