Ag Leader OnTrac3 MDU-G4, Руководство по установке

Страница: 5 / 26

3
O
N
T
RAC
3
MDU-G4
O
N
T
RAC
3
MDU-G4
I
NTRODUCTION
The MDU-G4 mechanical drive unit is a high performance steering actuator designed to provide high
precision steering when coupled to a GPS automated steering system. The MDU-G4 was designed for
ease of installation, portability between vehicles and a long service life. The MDU-G4 uses a reliable
high torque DC motor and a robust and simple gear drive for fast and responsive steering under all field
steering conditions. The unique split gear design and quick-release latch makes for an easy installation
that does not require the removal of the steering wheel so you gain time and are also able to easily
transfer your OnTrac3 between vehicles.
This manual provides the basic information and overview of the installation procedure for installing the
MDU-G4 steering actuator on a vehicle. Read this manual prior to beginning the installation as this
manual provides the cautions and warnings that need to be recognized and understood prior to installing
or operating an OnTrac3 system.
This manual provides the instructions for the installation of the components that come with this OnTrac3
installation kit. The installation is broken down into specific sections that may refer to sub-kit assemblies
that are part of this kit. These sub-kits will come with their own instructions so refer to those when
directed for information on installing the sub-kit parts.
Prior to operating and installing the OnTrac3 system, be sure to read and understand the Steering
Controller Operator’s Manual that comes with the Steering Controller system. That manual provides the
instructions on how to operate the OnTrac3 system as well additional safety information.
L
EGAL
D
ISCLAIMER
Note:
Read and follow ALL instructions in this manual carefully before installing or operating the
OnTrac3 system.
Note:
Take careful note of the safety information in the Safety Information section of this manual
and the additional safety messages provided throughout this manual and any other supplemental
material provided.
The manufacturer disclaims any liability for damage or injury that results from the failure to follow the
instructions, cautions, and warnings set forth herein.
Please take special note of the following warnings:
1. There is NO obstacle avoidance system included with the manufacturer’s product. The owner must
always have a human present in the operator’s seat of the vehicle when the OnTrac3 system is in use to
look for obstacles including people, animals, trees, ditches, buildings, etc. and take control of the vehicle
to manually avoid them if necessary.
2. The OnTrac3 system does NOT control the speed of the vehicle. The operator must always adjust the
speed of the vehicle manually so that it is operated at a safe speed that will not cause the vehicle to roll
over or go out of control.