Ag Leader AgXcel GX2, Руководство пользователя

Страница: 31 / 55

WWW.AGXCEL.COM 877-218-1981 info@agxcel.com
31
High Flow Columns
The high flow column is typically used with
rates over 10 GPA. AgXcel recommends the
use of low flow columns with 1/4” push to
connect outlet fittings.
The high flow columns are most often assem-
bled with 3/8” hose barb outlets. See the low
flow info below for the difference between
full and low flow columns.
Ball Selection for 30” Rows
GPM GPA Ball
.05-.18 2-16 Green Plastic*
.09-.30 3-10 Red Plastic*
.31-.72 10-20 Maroon Glass
.40-2.1 13-70 Stainless Steel
High Flow Indicators with 3/8” Hose Barb Outlet
Column Flow (GPM) .05-2.70 GPM
Equivalent Application Rate of 30” Rows at 6 MPH 2-70 GPA
*Plastic balls may
float too high with
heavier fertilizers,
such as 10-34-0.
AgXcel recommends
using the low flow
column.
p/n 53962
p/n 38260
4” Gauge
Full Flow Column
with 3/8” HB Outlet
End Cap
1/4” x 2” Bolt
7-12 Row Bracket
12 Row White Visibili-
ty Backer Plate
Center Feed Tee with
Gauge Port
1” MPT x 3/4” HB
Optional Tool Bar
Mount Bracket
p/n 20985
p/n 18039
p/n 20106
p/n 18037
p/n 18005
p/n 33816
Low Flow Column
(usually 1/4” QC)
The low flow column has a smaller internal diameter. This
means a heaver ball can be used to monitor a smaller flow.
AgXcel uses the low flow columns with 1/4” push to con-
nect outlet fittings. The flow capability of 1/4” tubing and
the low flow column is a great pair for rates on 30” rows
under 10 GPA.
Externally, the low flow column can only be identified by
“LOW FLOW” molded into one side of the column. All the
same fittings work with low flow and full flow columns.
Ball Selection for 30” Rows
GPM GPA Ball
.03-.09 1-3 Green Plastic*
.05-14 2-4 Red Plastic*
.10-.18 3-6 Maroon Glass
.15-.70 5-10 Stainless Steel
Low Flow Indicators with 1/4” Push to Connect Outlet
Column Flow (GPM) .03-.30 GPM
Low Flow Column with 3/8” hose barb .03-70 GPM
Equivalent Application Rate on 30” Rows at 6 MPH (1/4” QC) 1-10 GPA
*Plastic balls may
float too high with
heavier fertilizers,
such as 10-34-0.
AgXcel recommends
using maroon glass in
this case.
Low Flow
FLOATING BALL MANIFOLDS
(Read Instructions Completely before Beginning Installation)
©Agxcel