Parts List for Cotton Picker
Ag Leader Technology
CaseIH 2055
November 2002
2006200-1
9-2
Installing Monitor
in Cab
Parts required for this procedure:
•
Monitor Unit
•
Post Bracket
•
U-Bracket
•
Screw-mount cable-tie base, mounting screw and cable ties.
•
Monitor Bracket Install Kit (screws, bolts, washers and nuts)
Step-by-Step
Procedure
1. Using the hardware from the monitor install kit, attach the post
bracket to the u-bracket as shown in Figure 1.
NOTE: If installing a YM2000, PF3000 or PF3000 Pro monitor,
mount the u-bracket in the same position as shown in Figure 1.
Figure 1: Monitor Bracket Assembly
2. Position the post bracket assembly along the center cab post on the
right side of cab below mirror (if mirror is present). Move the
assembly up or down to obtain the optimum position for your
viewing. Figure 2 is the recommended location for all monitors.
