afx light 16-2906, Руководство пользователя

Страница: 6 / 36

EN 6
© Copyright LOTRONIC 2022
STATUS ICONS
When the icons are green, the machine works normally. When they are yellow, the operation is
abnormal.
Blower Motor
Shaft motor
Hopper motor
Temp sensor unconnected
Temp overheat
Tip over
Lack of time
PCB too hot
Sub PCB connected
2/3 channel output
RDM FUNCTION
RDM allows a console with RDM function to define DMX address and starting temperature of
spark jet.
DMX OPERATION
Channel DMX address Function
CH1 0-10 Stop
11-255 Fountain height 1-25
CH2 0-200 Pre-heat off
11-39 Emergency stop
56-200 Clear material
240-255 Pre-heat on
CH3 0-255 Density adjustment (0 is maximum density)
Safety channel 0-200 Control off
201-255 Control On
INITIAL SETTING
Setting Range Default
Set temperature 400-620 560
DMX address 1-512 1
DMX channel mode 3/2 3
Density 30-100 100
Safety address 0-512 OFF (0)
Tilt sensor ON/OFF ON
Restore defaults YES/NO NO
TFT backlight ON/OFF ON
Auto heating ON/OFF ON
Turn on power.
Check the status icons. If the icons are yellow, operation is abnormal. Please ask a professional to
check and repair the machine.
The sparking temperature of the machine is the factory default temperature. The machine will