- Connect you fog machine to DMX controller in using DMX cable
- Switch on the device
- The device will heat during 4mn.
- After 4mn, Use the five first channel of you DMX controller to control fog spray and led lights of the FOG COLOR
MINI
Note : When DMX cable is inserted on the DMX input, the wireless remote control is disable
2. DMX Channel Table
The DMX control is priority before wireless remote control. as soon as you connect the DMX controller, the wireless
remote control is switched off. On the following table, you will see DMX channel function
This fog machine has 5 DMX 512 channels:
Channel 1-Fog Output
DMX Value
Function
000-005
off
005-255
on
Channel 2-Brightness red LEDs
DMX Value
Function
000-005
off
005-255
on
Channel 3-Brightness green LEDs
DMX Value
Function
000-005
off
005-255
on
Channel 4-Brightness blue LEDs
DMX Value
Function
000-005
off
005-255
on
Channel 5- Red & Green & Blue color changes
DMX Value
Function
000-009
off
010-255
on
3. Wireless controler
With the remote control it is possible to emit fog via radio over a distance of up to 25 meters.
1. The remoter has 4 buttons: No.1 & No.2 & No.3 & No.4.
The fog will generate with color effect when you press one of these buttons. You can stop the fog output by
releasing the button.
Four different buttons represent four different colors:
No.1: Red color;
No.2: Green color;
N0.3 Blue color;
No.4: Color change of Red, Green, and Blue.
Note : The DMX controller have priority on the remote control. So if you want to control the device with the
remote control, disconnect the DMX cable from the device
© Copyright LOTRONIC 2015 FOG COLOR MINI
Page 7
