19
Mounting
EN
WWG / WWG 1 / WWG 2
5.2
Mounting the probe
Verify that the probe is submerged even in the case of small amounts of
liquid so that it triggers the alarm as early as possible.
1. Fasten the floor water probe at the lowest point of the area to be moni-
tored using the enclosed screws or a suitable weight.
2. Fasten the wall mounting rail probe to the wall at the desired level using
two screws.
The height of the probe body can be adjusted in the rail.
1. Loosen the screw above the probe body.
2. Move the probe body to the desired level and fasten the screw.
5.3
Replacing the rubber piece by a cable gland
5.4
Electrical connection
In the case of a permanently
installed cable, you can use
the centre rubber piece.
In the case of a cable that is
not permanently installed,
you must use the M20 cable
gland.
- M16 = 4 - 8.8 mm
- M20 = 8 - 12.5 mm
DANGER
ELECTRIC SHOCK
•
Verify that the degree of protection against electric shock (protection class,
double insulation) is not reduced by the type of electrical installation.
Failure to follow these instructions will result in death or serious injury.
M16
M16
M20
Содержание WWG
Страница 10: ...10 Produktbeschreibung DE WWG WWG 1 WWG 2 4 2 Abmessungen 60 mm 65 mm 100 mm 188 mm 166 mm ...
Страница 32: ...32 Anhang DE WWG WWG 1 WWG 2 15 Anhang 15 1 EU Konformitätserklärung ...
Страница 42: ...10 Product description EN WWG WWG 1 WWG 2 4 2 Dimensions 60 mm 65 mm 100 mm 188 mm 166 mm ...
Страница 64: ...32 Appendix EN WWG WWG 1 WWG 2 15 Appendix 15 1 EC Declaration of Conformity ...
