23
Operation
EN
DIM 20
7.4.8
Menu 8:
CAL ZP
(zero point calibration)
If you see a shift of the displayed value with reference to the zero point,
you can re-calibrate the product.
1. Display the menu item
CAL ZP
.
2. Press the OK key.
-
CAL ZP
starts to flash.
3. If the offset differs from the ambient pressure, apply a reference pres-
sure to the product; this reference pressure must be the same as the
start value of the measuring range.
4. Press the arrow key (ON key) to display the pressure.
5. Press the OK key to save the currently displayed value as the start
value of the measuring range.
If the calibration yields no improvement, for example, because of insuffi-
cient reference pressure, you can restore the factory settings via the
menu LD FAC.
7.4.9
Menu 9:
CAL EP
(end point calibration)
If you see a shift of the displayed value with reference to the end point, the
product must be re-calibrated. A reference pressure is required.
1. Display the menu item
CAL EP
.
2. Press the OK key.
-
CAL EP
starts to flash.
3. Apply a reference pressure to the product; this reference pressure must
be the same as the end value of the measuring range.
4. Press the arrow key (ON key) to read the pressure.
5. Press the OK key to save the displayed value as end value of the meas-
uring range.
If the calibration yields no improvement, for example, because of insuffi-
cient reference pressure, you can restore the factory settings via the
menu LD FAC.
Содержание DIM 20
