Safety
TankControl 01
5
2 Safety
2.1 Intended
use
TankControl 01 may only be used for level measurement of the fol-
lowing liquids:
•
Fuel oil EL according to DIN 51603-1
•
Fuel oil L according DIN 51603-2
•
Diesel according to EN 590
Any use other than the application explicitly permitted in this instruc-
tion manual is not permitted.
2.2 Predictable
incorrect
application
TankControl 01 must never be used in the following cases:
•
Hazardous area (Ex)
If the device is operated in hazardous areas, sparks may cause
deflagrations, fires or explosions.
•
Use as safety equipment
TankControl 01 does
not
replace the function of a level sensor
at the fuel oil tank.
•
Use as an overfill alarm system
2.3 Safe
handling
TankControl 01 represents state-of-the-art technology and is made
according to the pertinent safety regulations.
Each device is sub-
jected to a function and safety test prior to shipping.
X
Operate TankControl 01 only when it is in perfect condition. Al-
ways observe the operating instructions, all pertinent local and
national directives and guidelines as well as the applicable
safety regulations and directives concerning the prevention of
accidents.
Extreme environmental conditions have negative effects on the func-
tion of the product.
X
Protect TankControl
01 from shocks.
X
Only use the control unit
indoors.
X
Protect the control unit
from humidity.
2.4 Staff
qualification
The product may only be mounted, commissioned, operated, main-
tained, shut down and disposed of by qualified, specially trained
staff.