Safety
RG 210
5
•
Hazardous areas (ex)
If the device is operated in hazardous areas, sparks may cause
deflagrations, fires or explosions
2.3 Safe
handling
This product represents state-of-the-art technology and is manufac-
tured in accordance with the pertinent safety regulations. Each unit is
subjected to a function and safety test prior to despatch.
X
Operate the product only when it is in perfect condition. Always
observe the instruction manual, all pertinent local and national
directives and guidelines as well as health and safety regula-
tions and directives regarding the prevention of accidents.
WARNING
Severe burns or death due to mains voltage in the control unit
(AC 230 V, 50 Hz).
X
Do not expose the control unit to water.
X
Interrupt the mains voltage supply before opening the control
unit or before performing maintenance and cleaning work and
make sure it cannot be switched on by accident.
X
Do not tamper with the control unit in any way whatsoever.
WARNING
Risk of burns and explosions due to hot probe tip (probe tip can
reach temperatures of up to 100 °C).
X
Never touch the probe tip.
X
The probe and the control unit must not be operated in hazard-
ous areas.
2.4 Staff
qualification
The product may only be installed, commissioned, operated, main-
tained, shut down and disposed of by qualified, specially trained per-
sonnel.
Electrical work may only be carried out by qualified electricians in
accordance with local and national regulations.
2.5
Modifications to the product
Changes or modifications made to the product by unauthorised per-
sons may lead to
malfunctions
and are prohibited for safety reasons.
