Mounting and commissioning
12. Move the cable in the connection until the probe tip just reaches
the tank bottom. The measuring hole of the pressure sensor
must not be immersed in the oil sludge. The oil volume below
the level of the measuring hole is not detected by the pressure
sensor.
13. Insert the withdrawal hose after you have inserted the pressure
sensor.
Fig. 7: Inserting the withdrawal hose
14. Seal the connection in the tank cover to make the connection
smell-tight and tighten the connection to prevent the cable from
moving.
Mounting with screw connection
Using a free 1", 1½" or 2" connection in the tank:
1.
Insert the cable of the pressure sensor into the 1" screw con-
nection and use parts of the 2“ x 1½“ x 1 “ screw connection set
to seal it in the tank.
16
DIT 01
