6
CHAPTER 2 - ADJUSTMENT & OPERATING INSTRUCTIONS
(Reference numbers refer to the figures at the bottom of each page)
Adjusting the Handlebars Adjust angles and height of both handlebars as follows:
•
Release the Handlebars Clamp (1), which secures the
handlebars in place, by turning the cam Lever outward from
the vehicle.
•
Adjust the height and angle of your handlebars, by turning,
while raising or lowering the handlebars.
•
Tighten handlebars at the desired height and direction: secure
the Handlebars Clamp (1) by turning cam Lever inward.
Adjusting the Hand
Brake
The hand brake cable mechanism can be adjusted by any
authorized serviceman, dealer or by any professional authorized
to adjust hand brakes mounted on bicycles or motorcycles.
The Hand Brake is part of your safety system. DO NOT
adjust the Hand Brake by yourself - get professional
assistance!
Seating into the
SPORTSTER
Before driving the SPORTSTER make sure that the Charging
Plug is disconnected from the Charging Socket (3).
Note: While the Charging Plug is inserted in the Charging
Socket, the unit cannot be operated.
Lift the Lever (4) upward, rotate the Seat (5) and raise the
Armrest (2) to give you easy access to the Seat.
