34
Alarm actions
The alarm input can have set multiple actions to be taken on that alarm’s triggering.
These actions consist of setting the contact outputs on that same N-111, or on other N-
111 devices or other VNES devices on the network, of sending specific text messages to
a target over the network, or of sending an email message.
Alarm settings
Each alarm input can be configured to send an email message when the associated
alarm input changes state. Multiple alarm inputs which occur within 5 seconds will be
combined and sent as separate lines in a single email. Each event line in the email
contains a time stamp indicating when that event occurred, and the entire email will also
include information on the name and location of the N-111 which sent the email.
If the unit is configured to send trap messages to a SNMP server, then a change of state
on each alarm will trigger the sending of an appropriate trap message. This feature can
be individually enabled or disabled for each alarm input.
Remote Aux Actions
Address indicated the network IP address of the target device. This may be up to 15
characters long and must be in dotted-quad format. The default setting of “0.0.0.0”
indicates no action to be taken. Set this to the IP address of this N-111 to indication an
action to be taken on the local unit. Setting it to another valid IP address will cause the
N-111 to attempt to connect to that target on the network and set an output on it when
the alarm is triggered.
Aux is the number of the aux contact out on the target device to trigger. The valid range
of this number depends on the device being contacted. The N-111 does not know what
the target unit is, so it is the responsibility of the user to select a valid output number for
the target device.
Setting
Default Value
Range
Off
Check box on/off
SNMP
On
Check box on/off
Setting
Default Value
Range
Action address
“0.0.0.0”
15 characters
Action aux
1-6
1-99
Action state
On
On
Off
Action duration
5 seconds
Follow
1,5,15,30,or 45 seconds
1 or 5 minutes
Indefinitely
Содержание N-111
