AFG N608 Скачать руководство пользователя страница 24

 

 

2015 AFG Baby Furniture N608 Assembly Sheet

 

23 

Safety Tips for Assembling and Re-assembling Cribs

 

 

Parents should not use any crib with missing, broken or loose hardware parts. Crib slats or spindles should be spaced 
no more than 2-3/8” apart, and none should be loose or missing. NEVER use a crib with corner posts over 1/16” of an 
inch above the end panels (unless they are over 16” high for a canopy). 

 

Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing parts, or sharp edges 
before and after assembly and frequently during use. Securely tighten loose bolts and other fasteners. DO NOT use 
crib if any parts are missing, damaged or broken. Contact (AFG International Products Inc.) for replacement parts and 
instructional literature if needed. DO NOT substitute parts. 

 

Never place infants to sleep on pillows, sofa cushions, adult beds, waterbeds, beanbags, or any other surface not 
specifically designed for infant sleep. 

 

Always check all sides and corners of the crib to assure proper assembly with no openings that may entrap a child. 
The crib mattress should fit snugly with no more than two fingers width, one-inch, between the edge of the mattress 
and the crib side. Otherwise, the baby can get trapped between the mattress and the side of the crib. 

 

Do not try to repair any side of the crib without manufacturer-approved hardware. 

 

Putting a broken side up against the wall is not a solution and can often make the situation worse. 

 

When re-assembling the crib for your second child, please keep in mind that the screw holes will need to be filled in 
order for the screws to grip to the wood. Talk to your local hardware store or lumberyard about how to do it properly. 

 

One year limited warranty 
AFG International Products Inc. 

© wants you to be satisfied with any product that bears the AFG name or logo. We will 

provide promptly, at the request of the retailer, and without charge, any missing parts that have been reported, with proper 
description, within 7 days of the purchase of the products. Our warranty guarantees optimal workmanship and lack of 
significant defects. The product warranty lasts a year from the date of your purchase. Please keep the original receipt so 
that we may process your one year limited warranty request. This warranty only covers new units with original packaging. 
Ownership of the warranty is non-transferable. The warranty does not cover any used, second-hand, or demo models. Our 
obligation under this warranty is to replace or repair the merchandise, at our option, free of charge. This warranty does not 
cover any damaged or defective parts that result from normal wear and tear, abuse, negligence, improper use or alteration 
to the finish design, and hardware. Specific rights issued by this warranty may vary from state to state. Some states do not 
allow limitations on how long implied warranties last. DO NOT return products to the store once a product is used, it cannot 
be resold and the materials and energy invested in the product would go to waste. In the event that AFG determines that a 
defect that may result from customer abuse or misuse, we will contact you with information about services and methods to 
prevent occurrences. We strongly recommend you register your product with our company by filling out registration and 
mailing it back to us. This ensures you are up-to-date with our products’ maintenance and information.

 

 
This warranty does not cover damage caused by accident, misuse or any use other than as intended and described in this 
assembly sheet or damage resulting from failure to maintain and clean this product as specified in this assembly sheet. 
This warranty applies only to the original purchaser of the AFG International Products Inc. product. 
 

Care and Maintenance 

 

Storage: 

The crib must be kept in a dry and clean area. Solid wood tends to exchange moisture with the surrounding 

air and reacts to major changes in temperature and humidity. It is best to place your furniture away from heating or air-
conditioning vents. Direct exposure to sunlight can discolor of the wood, so do not place your product where it will 
receive prolonged sunlight exposure.   

 

Care and Cleaning:

 Do not scratch or chip the finish. Do not use abrasive chemicals for cleaning. Clean with mild 

soap on a soft rag. Rinse and dry thoroughly. If you choose to refinish this furniture, be sure to use only a non-toxic 
finish specified for children’s products. 

 

Wood is a natural material. As such, it can be affected by changes in temperature and humidity. Extreme changes in 
humidity and temperature can cause the wood to warp, swell, crack, or shrink, thus compromising the structural 
integrity of the crib and making it dangerous to use. 

 

CAUTION! 

Safety Tips for Use of Cribs 

Many older cribs, including secondhand or second use cribs, may not meet all current safety 
standards. For baby’s safety, even if you are on a tight budget, you should not purchase a used 
crib at a garage sale or accept a hand-me-down that does not meet the most recent Federal and 
ASTM standards.

 

 

Thank you for choosing AFG. 

 

MADE IN VIETNAM   AFG © 

Содержание N608

























Отзывы: