AFG 3.5AE, Руководство по обслуживанию

Страница: 15 / 37

15
CHAPTER 3: Engineering Mode
Eng 0
“Eng0” appears in
the time window
“DISPLAY TEST”
scrolls in matrix or
is static in text box
Eng 1
“Eng1” appears in
the time window
“HARDWARE
TEST” scrolls in
matrix or is static in
text box
Eng 2
“Eng2” appears in
the time window
“SWITCH
FUNCTION” scrolls
in matrix or is static
in text box
1. Standard or Metric selection.
- P1 flashes in left top window
- Switch MILE or KM using Start or +/- button
- The display will show “0” for miles or “1” for km on the right top window OR
- The display will show “STANDARD” or “METRIC” statically in the middle of text
box
- Press Enter to save selection and go to language selection
2. Language selection
- P2 flashes in left top window
- Use +/- button to select language
- The display will scroll newly selected language when key is
pressed.
- Press Enter to save selection and go to machine selection
3. Machine selection
- P3 flashes in left top window
- Use +/- button to select a machine type from Treadmill, Elliptical,
Bike and Ascent trainer.
- Scroll the full name in matrix or static in the middle of text box.
- Press Enter to go to model selection
4. Model selection
- P4 flashes in left top window
- Use +/- button to select a model from the narrowed down model list.
- Scrolls the mode name in matrix or static in the text box.
- Press enter to save the selection and go to energy saver selection
5. Energy mode selection.
- P5 flashes in left top window
- Use +/- button to switch between ON/OFF
- Display ON/OFF in the right top window OR
- Scrolls “ENERGY SAVER ON” or “ENERGY SAVER OFF” in matrix
or text box.
- Press enter to save the selection and go to first boot selection.
6. First Boot selection
- P6 flashes in left top window
- Switch “First Boot” Flag using +/- button
- The display will show “0” for OFF or “1” for ON statically on the right side OR
- The display will show “ON” or “OFF” statically on the right side when +/- button
is pressed to change
- Press enter to save current setting and back to standard or metric
selection
Press
Enter to
Select
Press
Enter to
Select
Press
Enter to
Select
Eng 8
“Eng8” appears in
the time window.
“TEST” scrolls in
matrix or is static in
text box
1. Program accelerator
- P1 shows in the left top window
- The multiple of program time defaults to 1 and
display in the time window or right top window.
- Press +/- to change it from 1 to 100.
- Press enter to save the settings and navigate to
next mode.
2. Clear user’s data
- P2 shows in the left top window
- Clears Accumulated time and distance, and
change to the default value in ENG8, in Puser, in
elog, in RCT , and so on .
- The Brickyard will scroll “CLEAR” or “ NO
CLEAR”.
- if there is no matrix, the TIME window show
“ 0 ” for “CLEAR ”or “ 1 ” for “NO CLEAR ” .
- If the data is not cleared, hold START for 5s to
clear.
- Press ENTER to set to next mode P3.
3. Burn-in period check
- P3 shows on left top window
- Burn-in period appears in time window with unit
hour
- Press ENTER to set next mode “P4”,
4. Quick Standby mode access
- P4 shows on left top window
- The Brickyard will scroll “PRESS START
BUTTON TO ENTER STANDBY MODE”
- Press Start button to enter standby model
instantly.
- Press Enter again to skip and navigate to “P5”
mode.
5. RPM Simulator
- P5 shows on left top window
- The Brickyard will scroll “RPM”
- +/- adjusts an rpm signal from 0 (off) t0 140.
- Resetting power will reset to 0 (off)
- Press Enter again to skip and navigate to “P1”
mode.
Press
Enter
to
Select
Eng 3
“Eng3” appears in
the time window
“INFORMATION”
scrolls in matrix or
is static in text box
1. Accumulated information
- Time window will show
accumulated time.
- Distance window will show
accumulated distance.
- Press enter to review software
version
2. Software version
- Display the UCB software
version the same way as
powering up.
- Press enter to review MCB
version
3. MCB version
- Display the MCB version on
screen in an appropriate way.
- Press enter to navigate back to
accumulated information
Press
Enter to
Select
1. All light up as default.
2. Stop turns off all lights
3. Start turns on all lights
4. All numerical displays
increase by 1 when
resistance up is pressed.
5. All numerical displays
decrease by 1 when
resistance down is
pressed
6. All alpha-numerical
displays change from A to
Z after each incline up
key press
7. All alpha-numerical
display change from Z to
A after each incline down
key press
8. Matrix display lights
one row up from bottom
to top if a up arrow key is
pressed.
9. Matrix display lights
one row up from top to
bottom if a down arrow
key is pressed.
10. All the other keys or if
there is keys without an
associated display
defined as above, display
the physical key matrix as
“Cxdx” in the left top
window and key code in
the right top window. 1. Basic function test
1.1 ECB motor
- Drive ECB motor up/down using
resi/- buttons
- ECB counts shows in resistance window
or left top window
- Drive elevation motor up/down using
i/- buttons.
- Incline ADC value shows in incline
window or right top window.
- Display heart rate value when heart rate
detected.
1.2 Induction Brake
- Change from PWM1 to PWM5 using
resi/- buttons
- PWM value shows in resistance window
or left top window.
- Drive elevation motor up/down using
i/- buttons.
- Incline ADC value shows in incline
window or right top window.
- Display heart rate value when heart rate
detected.
- Press enter to go to USB port test
2. USB port test
- “USB PORT TESTING...” scrolls in
matrix or is static in text box.
- “PASS” scrolls in matrix or is static in
text box if passed test. OR “FAIL” scrolls
in matrix or is static in text box if failed in
test.
- Press enter to go to Wi-Fi testing
Note:
1. USB port testing is only for the consoles which have USB interface.
2. First Boot flag is only used for consoles which work for different machine and/or model types.
3. A text box must be implemented when multi language is available.
4. Console goes to model selection after cycling the power when First Boot flag is set to ON.
5. If there is confliction between process number “Px” and other display items, the process number will only display
for 1 second and then display the real items.
6. Display items alternatively when a few items needs to be displayed in the same window. Light up the indictor if the
indicator exists.
7. A text box or LED/LCD matrix is needed if the console work for different machine and/or model types.