Page 5
Refer to Figure B for Step 3-6
Step 3: Using a flat head screwdriver or panel clip removal tool, remove the panel clip 2 from the intake
tube mount.
Step 4: Using a pair of pliers, squeeze the spring clamp 3 and remove the crankcase vent hose from the
intake tube.
Step 5: Disconnect the Mass Air Flow (MAF) sensor harness 4 .
Step 6: Using a 7mm nut driver, loosen the clamps at the throttle body 5 and at the airbox 6 . Remove
the intake tube from the vehicle.
2
REMOVAL
Figure B
3
5
6
4
2