16
19.
Before installing the aFe Scorpion grille, install the supplied power harness. The red wire
goes on the positive battery terminal (+) and the black wire goes on the negative battery
terminal (-). You will need to mount the switch inside the cab or to an available prewired
switch. Use the (15) supplied
8” cable ties to secure the wiring loom to the vehicle.
Содержание 79-21007L
Страница 3: ...2 ...
Страница 14: ...13 15 Remove and discard the two 2 nuts from the supplied 20 single row LED light ...
Страница 23: ...22 28 Reinstall the twelve 12 screws into the core support removed in Step 4 and tighten ...
Страница 25: ...24 32 Remove all the painter s tape if any was applied 33 Installation is now complete ...