Afag UG 20 NC, Инструкции по монтажу и обслуживанию

Страница: 29 / 36

UG 20-UG 25-OI-vers. 3.5 gb. 20190409 29
4.0.0 Maintenance instructions
4.1.0 Maintenance and servicing of the UG 20/25 Universal gripper
CAUTION
The module may only be disassembled when the system is
aerated and deactivated. If pneumatic connections are
disconnected when they are under pressure, this may result in
serious personal injury due to fast movements of moving parts.
Maintenance
interval Service measures
As required
 Clean the module with a dry, lint-free cloth.
The module must not be washed down; do not use any
aggressive cleaners.
1 Montly
 Check the safety labels for damage, readability and
cleanliness.
The shock absorbers and stop screws must undergo regular functionality checks, and be replaced
if required. We recommend replacing the shock absorber after a maximum of 5 million load cycles.
If shock absorbers are missing, defective or incorrectly set up, the functionality of the module will
be compromised and may lead to its destruction!
Further maintenance
Under the following conditions is the UG pince universelle module maintenance
free:

Clean workshop atmosphere

No splash water

No dust and fumes caused by abraison or processes

Ambient conditions according the technical cataloge