Afag GMK 20 Series Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 52

Afag GMK 20 Series Скачать руководство пользователя страница 14

14 GMQ20; GMQ20-RM16-25-OI-vers. 2.5 gb. 05.02.15

3.1.1 Symbols

Assembly and initial start-up must be carried out by qualified personnel only and
according to these instructions.

CAUTION

Indicates a possibly dangerous situation.

Non-compliance with this information can result in damage to
property or light to medium personal injuries.

NOTE

Indicates general notes, useful operator tips and operating
recommendations which don't affect safety and health of the
personnel.

3.1.2 General description

This is an incomplete machine

The series of the GMQ 20 Gripper and (GMQ 20/RM 16/25 Rotary gripper module) is
used for the Gripper and (Rotary gripper module) smooth movement of rigidly
mounted loads under the ambient and operating conditions defined, see Technical
data.

The installation position of the GMQ 20 Gripper- and (GMQ 20/RM 16/25 Rotary
gripper module) can take place both vertically and horizontally.

Modifications on the GMQ 20 and GMQ 20/RM 16/25 module that are not described
in these Montage Instructions or have not been approved in writing by Afag
Automation AG are not permitted. In case of improper changes or assembly,
installation, operation, maintenance or repairs, Afag Automation AG rejects all
liability.

«
...
12
13
14
15
16
...
»

Содержание GMK 20 Series





















































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды