Afag Electric Slide ES12, Перевод оригинального руководства по эксплуатации

Страница: 31 / 48

ES8-ES12-BA vers. 1.3 en. 20190311 31
WARNING
The plant installer is responsible for ensuring that, when an ax-
is system is set up (when the safety door is open), there are no
operating errors and that the axis can therefore not start uncon-
trolled.
3.16 Setup, Retrofitting
WARNING
The ES Electric Slides are set in motion by the electric control
system. If the ES Electric Slides cannot move freely, there is a
risk of injury and crushing in conjunction with attachments.
If attachments on the ES Electric Slide can pose a hazard in
conjunction with the moving slides, a correspondingly safe op-
eration must be ensured.
WARNING
Due to the decentralised control unit, the operator of the ES
Electric Slide is not necessarily alongside the product and can
therefore endanger other persons in other areas.
For work at the ES Electric Slides, turn off the control unit of the
module and secure it against unintentional restarts. Signals
from the control unit can lead to unintentional movements of
the module, which can cause injuries.