Afag CS 6, Перевод оригинальной инструкции по монтажу

Страница: 27 / 30

CS6-BA-vers.1.7 gb. 20190312
27
4.1.3 Expendable parts for elastomer shock absorbers
4.1.4 Adjustment of the elastomer shock absorber
CAUTION
Please note:
The stroke time is not reduced by using elastomer absorbers.
There is however no restriction on the cycle number/hour when
elastomer shock absorbers are.
Expendable parts
Dammping element
The shock absorber elements of the elastomer
shock absorbers are wearing parts.
Shock absorber element: Order No.
50400874
A used shock absorber element can be
exchanged very easily. The shock absorber
element is pulled out of the sleeve to the front
and the new shock absorber element is
The power values indicated in the technical data are applicable to a maximum set
stroke (H max) when the adjusting pin was completely turned in. The defined fixed
end position can however be reached when the stroke is reduced correspondingly
resulting in less power and thus a reduced drive force (Fa). This applies for the
rear position with the CS 6 as the return stroke force is less than 15N.
1. Turn out the adjusting pin until
the defined end position for the
existing drive force (Fa) was
reached.
2. Check the absorber in a test
run. Make sure that the carriage
does not dash.
Adjustment pin
- remove
- use
Shock absorber
Shock absorber