Afag 50386049, Руководство по сборке и эксплуатации

Страница: 7 / 48

General
Assembly instructions EN

CS 6/20 - CS 6/40

Date 01.06.2021

Version 2.0 7–48
1.4 Applicable documents
In addition to the assembly instructions, the following documents must be
observed:

Safety data sheets etc.

Instructions for integrated components (

supplier documentation)
Each compact slide is accompanied by a safety information sheet. This
information sheet must be read carefully by every person who carries out work
on and with the compact slide.
1.5 Warranty
The warranty terms for Afag handling components and handling systems are
the following:

24 months from initial operation and up to a maximum of 27 months from
delivery.

Wear parts (e.g. shock absorbers) are excluded from the warranty.*
The warranty covers the replacement or repair of defective Afag parts. Further
claims are excluded.
* However, a customer has a right to a defect-free product. This does also
apply to defective accessories and wear parts. Normal wear and tear is
excluded from the warranty.
The warranty shall expire in the following cases:

Improper use of the module.

Non-observance of the instructions regarding assembly, commissioning,
operation and maintenance of the module.

Improper assembly, commissioning, operation and maintenance.

Repairs and design changes carried out without prior technical instructions of
Afag Automation AG.

Removing the serial number from the product.

Using the compact slide without shock absorbers or with defective shock
absorbers.

Inadequate checking of wear parts.

Non-observance of the EC Machinery Directive, the Accident Prevention
Regulations, the Standards of the German Electrotechnology Association
(VDE) and these safety and assembly instructions.
1.6 Liability
No changes shall be made to the compact slide CS 6 unless described in this
instructions manual or approved in writing by Afag Automation AG.
Afag Automation AG accepts no liability for unauthorized changes or improper
assembly, installation, commissioning, operation, maintenance or repair work.