Afag 11001864, Руководство по сборке и эксплуатации, Страница: 47 / 52

Decommissioning, dismounting and disposal
Assembly Instructions EN

LM 12 I LM 16

Edition 11/2020

Rev. 2.5 47–52
10 Decommissioning, dismounting and disposal
The linear modules must be properly dismounted after use and disposed of in
an environmentally friendly manner.
10.1 Safety instructions
Also observe the safety instructions in

chap. 2 „Safety instructions“ in this
manual.
10.2 Decommissioning
If the linear modules are not used for a longer period of time, they must be
properly decommissioned and stored as described in

Section 4.5.
10.3 Disposal
The linear modules must be disposed of properly at the end of their service life
and the raw materials used must be recycled. Observe the legal regulations and
company requirements.
The linear modules must not be disposed of as a complete unit. Dismantle the
linear module and separate the various components according to type of
material and dispose of properly:

Scrap the metallic materials.

Hand over plastic parts for recycling.

Sort the rest of the components by their material properties and dispose of
them accordingly.
WARNING
Risk of injury from improper decommissioning and disposal!
Improperly carried out activities can result in considerable material damage
and serious injury.

Use only qualified personnel to carry out the activities.

Disconnect the media supply (electrics) before removing the grippers!

Only remove the linear module when the control system is switched off and
secured!
NOTICE
Risk to the environment from incorrect disposal of the linear modules.
Environmental damage can be caused by improper disposal of the module.

Electronic parts, electrical scrap, auxiliary and operating materials must
be disposed of by approved specialist companies.

Information on proper disposal can be obtained from the responsible local
authorities.