Afag 11001864, Руководство по сборке и эксплуатации

Страница: 38 / 52

Commissioning
38 – 52 Assembly instructions EN

LM 12 I LM 16

Edition 11/2020

Rev. 2.5
7.2.2 Setting of the lifting and stop screws
Stroke adjustment with stop pin (M8x1/25 and M8x1/40)
1. Adjust the stroke (H) by adjusting the stop pin (Fig. 19, 1).
- 1 x turn = 1 mm
2. Fasten the stop pin with the lock nut (Fig. 19, 2).

The stroke with stop pin is adjusted.
Fig. 19 Stroke adjustment with stop pin
Stroke adjustment with stop screws (AS08/25 and AS 08/40)
1. Adjust the stroke (H) by adjusting the stop screw (Fig. 20, 3).
2. Fasten the stop screw with the lock nut (Fig. 20, 4).
- Stopping accuracy 1 - 0.01 mm.

The stroke with stop screws is adjusted.
Fig. 20 Stroke adjustment with stop screws
These stop screws can be combined with a proximity switch holder and a
proximity switch D 6.5 mm or with an angular proximity switch holder 8x8 mm
proximity switch for end position sensing.