Albert 2 User Manual
February 2018| ©AEVI International GmbH
PAGE 24/46
•
After some time, the AEVI logo is replaced by an acquirer
or customer-specific logo.
7.5
Power down
There are three forms of powering down the device: correct procedure, forced and automatic.
7.5.1
Correct Procedure
Push and hold the power button for a second.
For the first second, there is no on-screen feedback. After a second, a confirmation prompt appears
on screen:
If it is necessary to power down Albert 2, we encourage the use of this method in order to prevent
data loss.
7.5.2
Forced Power Down
Push and hold the power button for approximately 6 – 10 seconds to force the device to turn off. The
screen goes blank as the device shuts down from the ON state to the OFF state.
7.5.3
Automatic
Albert 2 automatically begins to power down once the battery has dropped to 1%. All current
activities are stopped so that the battery does not completely run out.
