AEV Energia, Руководство пользователя

Страница: 24 / 44

P
AG
. 29
Energia Energia
Energia Energia Energia
E
le
c
tr
o
n
ic
E
q
u
ip
m
e
n
t
E
le
c
tr
o
n
ic
E
q
u
ip
m
e
n
t
Electronic Equipment
A
E
V
S
.
P
.A
V
I
A
D
E
L
L
A
T
E
C
N
I
C
A
N
.3
I
-
4
0
0
5
0
A
R
G
E
L
A
T
O
B
O
L
O
G
N
A
I
T
A
L
Y
W
W
W
.
A
E
V
.
N
E
T
W
W
W
.
A
E
V
-
U
S
A
.
C
O
M
E
-
M
A
I
L
:
I
N
F
O
@
A
E
V
.
N
E
T
H ow t o
How t o use TELCO buses
The buses Telco can be 2 or 4 depending on the configuration set in the System Setup
menu.
The Telco channel is used to connect one or more telephone hybrids to the console. An
automatic control avoids the re-sending of the Telco signal on the same Telco bus.
Each telephone hybrid is provided with an input to direct the signal that has to be sent to the
listeners. The same hybrid has also an output from which you can take the signal that has to be
sent to the console.
The console's output (eg. TELCO 1) needs to be plugged with the hybrids' INPUT.
The output of the telephone hybrid needs to be plugged with any digital line input. The present
input needs to be set as TELCO (eg. TELCO 1) and not as NORMAL.
In general the communication with an user through a telephone hybrid takes place in two
different moments: private communication and live communication.
Private com m unication
The director can speak privately using the telephone or through the service microphone with the
TB key of the mixer or with an external microphone if the PRIVATE TELCO has been set (to see
Menu Edit).
Let's take for example the private communication on TELCO 1:
In the Cue configuration menu the TB to TELCO 1 function must be activated.
To activate the private communication with the telephone the TELCO 1 channel must be in the
STOP position and the cue must be activated
The activation of the CUE buttons allows the selection of the telephones to which one can
privately speak in case of using more TELCOS at the same time.
To activate the service microphone and to speak through the telephone the button TB of the
console must be pressed; if you use an external mic it will selected through the external TB.
If you want to send audio in stand by you just need to enable "TELCO 1 ON" in all the buses in
use to for the on air, by entering the channels' EDIT menu.
Once the TB button pressed the audio in stand-by will be automatically smoothed to allow the
director to have no problems of communication.
Live com m unication
The DJ speaks through his microphone with the listener while they are both on air.
The MIC DJ channel is in the START position and the slider is lifted up, the TELCO 1 channel is in the
START position and the slider is lifted up.
All the channels must be sent to the telephone and must have the "TELCO 1 ON" function
activated.