COMPACTA 400 - 620 - 960 M
14
3710305395
2.3
WORKING CYCLE
The machine can operate in two different ways:
– band wrapping with a preset number of wraps (3, 4 o 5);
– continuous wrapping with unlimited number of wraps.
The
fi
rst type of wrapping occurs with a simple impulse start of the START pedal.
The second type of wrapping occurs by keeping the START pedal pressed.
Once the operator has placed the product to be wrapped inside the rotating ring and pressed the START
pedal, the machine begins its cycle:
– the rotating ring starts and begins wrapping the product performing the number of preset wraps;
– at the last wrap of the rotating ring, the clamp comes out to hook the
fi
lm;
– terminated the wraps counting, the rotating ring stops while the clamp, re-entering, blocks and cuts
the
fi
lm.
The machine is ready for a new wrapping cycle.
If the operator keeps the START pedal pressed, the rotating ring continues rotating (hence wrapping
the product); when releasing the pedal, the machine starts the same procedures of the last wrap of the
rotating ring described in the previous cycle.
Danger - Attention
During band wrapping or continuous wrapping,
fi
rmly hold the product with the hands.
(*)
With this type of wrapping the operator must push forward and/or backward the product to be wrap-
ped.
