Step 2
:
Charge the trainer. Lift the
small rubber tab on the
trainer to access
the charging port.
traine
Plug
the
wall
charger
i
nto
the
wall
socket
and
into
the
charging
port
of
the
r
.
A
red
led
light
will
be
visible
on
the
trainer
during
the
charging
process.
1
2
Step 1:
Screw the metal
prongs onto the trainer till
the prongs are securely
attached. Normally, they
are assembled in the factory.
Step 3:
To turn on/off the trainer, just make the magnet touch the magnet switch on the trainer until the
vibrates. The red and blue lights will flash once and the
will beep.
trainer
trainer
Quick Start
-03-
Tip 2: To do a self-test, place the magnet near to the ON/OFF area on the trainer for 3 times, and the trainer will beep, vibrate or shock with the
blue light on, indicating the trainer works normally.
3
ON/OFF area
Place the magnet near to the magnet switch
on the trainer until the
vibrates. The
red light will be on, indicating that the
is started. Just repeat the above steps to turn
off this trainer.
trainer
trainer
Tip 1: It is recommend to charge the trainer for up to 8 hours for the first 3 times.
