17
HOW TO
…
Update the ScoopFone IP firmware
First download from the AETA web site the most recent version of
the firmware. Then updating the unit can be done using two
alternate methods.
Update using the html interface of the ScoopFone IP
Use the menu
Maintenance
/
System update.
On this page, click “Browse…”, select the update file on the
computer;
Click the “Update” button: the process starts, and a message
can be seen on the device’s display;
Wait for the end of the process. The displayed text is then
“Rebooting” on the html page. At this moment the unit
should normally reboot by itself.
Update the firmware using a USB memory key
Copy the file onto the root of the USB key;
Switch on the ScoopFone IP and wait for the complete start;
Plug the USB key on the rear side of the unit;
Press the
OK
button to acknowledge the “Update Unit from
USB?” message;
The firmware update starts. It lasts for around 5 minutes,
then the unit automatically reboots.
For more details, refer to the web page dedicated to the
ScoopFone IP on our web site
www.aeta-audio.com
.
Increase the robustness of the transmission
To increase the resilience to packet losses, activate the packet
duplication: menu
IP
/
Packet repl
. Be aware that this setting
influences the transmission (you should apply the same
setting on the remote unit for an effect at the reception on
your side).
To stand a high jitter level at the reception, change the “IP
Network Quality” setting: menu
IP
/
Net quality
. When this
quality is declared bad, the reception buffer size is increased
for a higher tolerance to jitter (but traded for a latency
increase).
Remote control the ScoopFone IP (via Internet)
Refer to the application note "
Using the AETA Remote Access
service
"
