13
Server SIP port
The default SIP port for the server is 5060. In some cases it is useful to use the alternate port 5070.
You can also set any other port value by using the web interface, or the extended IP menu (see below).
RTP port for the audio stream (display only)
This port can be changed through the web pages or the extended IP menu (see below).
Activate packet duplication (double stream)
When this feature is enabled, a double stream is sent, for a more robust transmission.
Line quality setting
This setting adapts the size of the reception jitter buffer depending on the expected transmission
quality (the lower quality, the bigger buffer for compensation).
“Low” is recommended for a poor quality data link. The “Very good” setting provides the minimum
latency, but is also
more sensitive to possible jitter on the network.
Extended IP menu
Some parameters of the Audio over IP (AoIP) operation are not normally accessible via the IP menu, or they can only be read but not edited.
However, there is a mode, reserved for advanced users, that provides full access to all the AoIP parameters.
To activate this extended IP menu:
Hit the following key sequence:
1 Up # # @ A E T A @
(display :
@AETA@
)
(“
Up
“) is for the
+
key above the display)
Validate with the call key
From then on, the extended IP menu is accessible until the ScoopFone IP is switched off.
