Aesculap FAV5 CL, Инструкция по эксплуатации

Страница: 10 / 118

Aesculap Suhl GmbH
Battery-powered clipping machine FAV5 CL
8
4.3 Function checks of the charger
¾
Carry out a visual inspection.
¾
Prior to connecting the product to mains power:
– Check mains power cord 5 for possible damage.
– Check the product for any damage (e.g. bent con-
tacts of the charging bays).
¾
Plug in mains power cord 5 at the device socket of
the charging station.
¾
Plug in the mains plug at the mains power socket.
¾
Place Li-ion battery 8 in charging bay 6 of the
charger 4 and charge.
- or -
¾
Place battery-powered clipping machine FAV5
CL
2 in charging bay 10 of the charger 4 and
charge.
Charge state indicator 7 or 9 lights up red.
After charging, the charge state indicator 7 / 9
shines green and the battery-powered clipping
machine FAV5 CL
2 /Li-ion battery 8 is ready for
operation.
The product is ready for operation.
4.4 Safe handling blade
4.4.1 Sharpening the cutting plate
Note
For sharpening the cutting plate, please contact Tech-
nical Service, see Chapter Technical Service.
4.4.2 Changing the blade
Fig. 3
¾
Press ON/OFF switch 11 to switch off battery-pow-
ered clipping machine FAV5 CL.
¾
Press blade lock 14 , see Fig. 3.
WARNING
Risk of injury caused by sharp cut-
ting plates!
¾
Handle the blade of clipping
machine FAV5 CL with appro-
priate caution.
14