Aesculap Exacta/Isis, Инструкция по эксплуатации

Страница: 14 / 76

ENGLISH
14
3.2 Storing the power cable
4. Operation
4.1 Switching On and Off
4.2 Comb attachment
The further you push the comb attachment onto the
blade set, the shorter the cutting length.
If you do not need the full length of
the cord, part of it can be stored in
the cable storage compartment
9 .
¾
Pull out the mains plug.
¾
Turn the charging unit upside
down.
¾
Wind the excess cable round the
holder in the base, then run the
cable through the small recess in
the housing to the outside.
¾
To switch the appliance on, slide
the On/Off switch
4 forward.
¾
To switch the appliance off, slide
the On/Off switch to position 0.
¾
Switch off the trimmer and slide
the comb attachment onto the
blade set until it snaps into place.
You can now start trimming hair
with the trimmer in the usual way.
¾
The comb attachment can be ad-
justed to 4 different cutting
lengths (approx. 3 to 6 mm). To
do so, push it to the required po-
sition on the blade set.