- 13 -
After setting “minute” digit, press
or
to confirm clock settings and go
back to main operation interface.
Under clock setting interface, if there is no any press on buttons within 30 seconds,
will automatically confirm current clock settings and go back to main operation
interface.
Timer settings
On main operation interface screen, press
to enter into Timer setting
interface.
Then press
and
to set Timers, there’re 2 groups of Timers.
When Time 1 is flashing, press
to enter into Timer 1 ON “hour” digit setting
which will flash, then press
and
buttons to set value for “hour” digit.
After setting Timer 1 ON “hour” digit, press
again to enter into Timer 1 ON
“minute” digit which will flash, then press
and
buttons to set value
for Time 1 ON “minute” digit.
After setting Timer 1 ON “minute” digit, press
again to enter into Timer 1 OFF
“hour” digit, the setting way is same as above.
When finish setting Timer OFF time, press
again to confirm current Timer
settings, and enter into Timer 2 ON/OFF settings, the operation is same as Timer 1
settings, then back to main operation interface.
On Timer setting interface screen, press
at any time to confirm current Timer
settings and back to main operation interface.
On Timer setting interface screen, press
for 5 seconds to cancel current
Timer ON/OFF settings.
Lock and unlock buttons
The keypad will automatically lock after 60 seconds of inactivity. An icon will show on the
screen indicating the keypad is locked. To unlock:
Press
for 5 seconds, a “buzzer” will sound, buttons will be unlocked.
Can lock the buttons in the same way above.
--
Automated Environmental Systems Ltd., Unit 1, 1 Wimbledon Avenue, Brandon, Suffolk IP27 0NZ
01842 819130 | [email protected]
