NEED MORE ASSISTANCE?
+44 (0)288 639 0693
SCAN THIS QR CODE TO BE BROUGHT TO OUR RESOURCES PAGE.
VIDEOS | HOW-TO GUIDES | MANUALS | QUICK START GUIDES
LIGHTNING PRONE AREAS MUST USE SURGE PROTECTION
FOR POWER SUPPLY!
Optional
Exit Button
Separate
lock PSU
Magnetic
Lock
Driveway
Gates
Gate
Controller
N/C
Relay1
Relay 2
COM
N/C
N/O
COM
N/C
N/O
Relay Connections
4
See overleaf for
more PCB details
Turn Over
1
Site Wiring
TIP:
Most technical calls received are due to installers using CAT5 or alarm cable
to power the unit.
NEITHER
are rated to carry enough power!
( 1.2amp peak )
Please use the following cable:
Up to 2 metres ( 6 feet )
–
Use minimum
0.5mm
2
( 18 gauge )
Up to 4 metres ( 12 feet )
–
Use minimum
0.75mm
2
( 16 gauge )
Up to 8 metres ( 24 feet )
–
Use minimum
1.0mm
2
( 14 gauge )
POWER CABLE
KEEP POWER SUPPLY AS CLOSE AS POSSIBLE.
Power
Consumption:
Standby = 80mA
Peak = 1.2A
INGRESS PROTECTION
We recommend sealing all entry holes for prevention of insects that can
cause issues with a risk of shorting out components.
To maintain the IP55 rating please follow the sealing instructions included.
(also available online)
Power
3
DC24v IN
(Polarity Protected)
2
iGate Enclosure
(Install at height to allow the
internal antenna to find signal.)
DC Power Cable
(1.0mm2
– 8m MAX)
Keep PSU as close to the unit as possible
& Do not share PSU with other devices.
iGate Prime 6 4G
- Advanced GSM Switch
STILL HAVING TROUBLE?
Find all of our support options such as Web Chat,
Full Manuals, Customer Helpline and more on
our website:
WWW.AESGLOBALONLINE.COM
* ALWAYS TEST THE UNIT ON SITE
BEFORE
INSTALLATION TO AVOID RE-STOCKING FEE *
See full T&
C’s
on our website
Note:
PSU not supplied.
Can be purchased separately.
24v DC 1.2A peak.
SIM Preparation
Ensure you read all instructions before
continuing.
The SIM cards provided need activated
before use.
Follow the instructions
provided or visit our telecoms website for
more details:
1
Ensure there is good
4G signal on site. 4G
units will fall back to
3G service in some
countries.
SITE SURVEY
This product requires a regular voice & SMS SIM card.
Do not use a data only SIM, as this will not work in the unit.
Set up on a bench in workshop
BEFORE
going to site.
Program the unit in the comfort
of your work bench and call
technical support should you
have any questions.
Please read this entire manual before installing this
product. A full comprehensive manual is available on
our website for additional information.
