9
USING POWER
•
Once fully charged, the unit is ready to be connected to your electrical devices using any of
the following power outputs. Additionally, the unit may be charged at the same time power
is used.
•
Monitor the Battery Indicator in the LCD display for battery status. When the level drops
below 2 bars, stop using and recharge.
•
If the battery level is fully discharged, the OUTPUT INDICATOR will flash. At this time all
outputs will be disabled. Once battery level is sufficient, they will function again.
•
See troubleshooting section for other battery fault information.
CAUTION:
DO NOT use with any life support system. Aervoe assumes no liability, written or implied,
when used with medical equipment.
AC Output
– includes a pure sine wave inverter. Do not exceed 1000W or 9A total combined devices
usage.
1.
Press the POWER BUTTON. The LCD display will turn on. Verify there is sufficient battery
power to operate your device.
2.
Move the AC Switch to the ON/AC position. The cooling fan and inverter should be heard.
3.
Plug in your AC device to any of the 3 110V outlets and operate normally.
4.
The 110V OUTPUT icon will show in the LCD Display and the OUTPUT ACTIVATED icon will
spin indicating power is being provided to your device.
DC Output
There are 3 types of 12V DC power outputs available. They may be used simultaneously if needed.
•
12V DC/10A barrel power port - standard vehicle power receptacle style
•
12V DC/10A 6.5mm x 3mm power port
•
Anderson power port - for devices using Anderson red/black power pole connectors.
CAUTION:
Do not confuse this output with the 12V DC charging inputs. Damage could
occur if power input was plugged into this port.
1.
Press the POWER BUTTON. The LCD display will turn on. Verify there is sufficient battery
power to operate your device.
2.
Move the DC Switch to the ON/DC position.
3.
Plug in your 12V device to any of the 3 12V DC outlets and operate normally.
4.
The 12V OUTPUT icon will show in the LCD Display and the OUTPUT ACTIVATED icon will
spin indicating power is being provided to your device.
5V USB Output
There are 3, 5V/2.4A rated USB ports available. They may be used simultaneously if needed. All 3 have
the same rating, please disregard the printing for iPhone, General, and Galaxy under each port.
1.
Press the POWER BUTTON. The LCD display will turn on. Verify there is sufficient battery
power to operate your device.
2.
Plug in your USB device to any of the 3 outlets and operate normally.
3.
The USB OUTPUT icon will show in the LCD Display and the OUTPUT ACTIVATED icon will
spin indicating power is being provided to your device.
