Aerus LAUNDRY PRO, Руководство пользователя

Страница: 7 / 32

7
HOSE INSTALLATION
Turn the cold water
off by shutting
off the cold water
faucet.
NOTE:
To help prevent water spray when
disconnecting hoses, you can relieve pressure
in the water line by momentarily starting your
washing machine.
NOTE: To ease hose installation and prevent cross threading,
connect hose prior to mounting unit on wall.
NOTE: Remove the two black caps from the hose
connections before installing hoses.
Remove the cold
water hose from the
cold water inlet on the
back of your washing
machine. Leave hot
water hose attached.
When connecting hoses to your Laundry Pro hand start the hose
connector(s) Using adjustable pliers finish tightening hose connector(s).
Do not remove or disconnect the hot water line from your washing
machine or water valve.
CAUTION:
Return the Laundry Pro cover to its
original position, fitting the bottom in
place and tipping upward.
Secure with two (2) screws
(not shown) along the top edge.
Put the two (2) remaining screws along
the bottom edge and tighten.
REINSTALL THE COVER
HOSE INSTALLATION
Screws
Screws
1
1 2
3
2