Fill the Mineral Tank
1)
With bypass valves in the
“OFF” position turn on the
main water supply.
2)
Open “Inlet” valve slowly ¼
turn clockwise to fill the media
tank.
3)
Slowly continue to open inlet
all the way once water is
flowing from the drain line.
If the mineral tank was not filled, do so at this time following the directions below:
CAUTION:
Allow time for glued connections to cure before proceeding.
!
CAUTION:
Inspect all plumbing connections. Check for leaks and make repairs as needed
.
!
NOTE:
Watch to see if the backwash flow rate is proper – do not obstruct
drain line. This is particularly important for Iron and Sulfur filters.
