4
FITTING GUIDE
5. Connect the male power/speaker ISO harness (Pg.2. Fig 2.) to the female
power/speaker ISO harness from the aftermarket head unit.
For aftermarket head units which do not have an ISO connector the interface
uses the following wiring colours:
Wire Colour
Function
Wire Colour
Function
Yellow
Permanent 12V
Purple
Right Rear S
Black
Ground
Purple/Black
Right Rear Speaker -
Red
12V Ignition
Green
Left Rear S
Orange
Illumination
Green/Black
Left Rear Speaker -
Blue
Antenna Remote
Grey
Right Front
Pink
Speed Pulse
Grey/Black
Right Front Speaker -
Green
Park Brake
White
Left Front
Purple/White
Reverse
White/Black
Left Front Speaker -
6. Feed the long extension loom down through the dashboard and behind
the skirting (highlighted). Bring the wire up under the passenger seat and
locate the OEM amplifier
7. Disconnect the amplifier connectors and plug these into the grey and green
connectors of the extension loom
www.aerpro.com
