FITTING GUIDE
l. Remove and disconnect the original head unit.
2. Connect the 12 way molex connector of the head unit patch lead
(supplied separately) to the interface (Pg.2. Fig l .)
3. Connect the opposite end of head unit patch lead to the head unit steering
wheel control input on the back of the aftermarket head unit. This may be a
3.5mm jack plug or a wire input depending upon the head unit brand being
fitted. Please see the head unit installation manual for further information on
where to connect.
Important Note: This step must be completed before connecting power to the
interface. Failure to so do may result in no steering wheel control function.
4. Connect the 14 way molex connector to the interface.
www.aerpro.com
3
