5
KIT CONTENTS
50cc
P-51D Mustang
Materials List
BASIC AIRCRAFT PARTS:
Fuselage with pre-installed vertical fin – covered, fire-
wall fuel-proofed,
(6) 4-40 blind nuts installed for the mounting of
cowling
(2) 6.35mm blind nuts installed for the mounting
of wings
(4) 6-32 blind nuts installed for the mounting of
tail wheel
(1) Engine box top hatch cover with AW logo in-
stalled by (4) T2.6x8mm PWA screws
(2) Tail Wheel Gear Doors installed
(1) Tail Wheel installed in the fuse
(2) Fiberglass Wing Fillets – Left and Right,
painted and glued on the fuse
Sliding Canopy system—painted and installed
(1) Cockpit and panel – painted and installed
Left Wing with Aileron, Flap – covered: Pre-drilled
for the mounting of the control horns
(6) 6-32 blind nuts installed for the main retracts
mounting
(2) 4-40 blind nuts installed for the mounting fuel
tank and bomb pedistal
(5) pin point hinges glued – for aileron
(5) pin point hinges glued – for flap
(1) front locater pin installed
(1) Plywood Wing Bolt mounting pad – covered
and glued
(3) Dummy Guns – vacuumed and glued
(2) aileron and flap servo hatch cover installed by
(8) T2.6x8mm wood screws
(1) main landing gear hatch cover installed by (4)
T2.6x8mm wood screws
