AeroVironment EV Solutions EVSE-RS Plug-in, Руководство пользователя

Страница: 7 / 28

6
6 7
DANGER
HIGH VOLTAGE WARNING
AeroVironment recommends that your Charging Dock be installed by a licensed, qualified
electrician. To avoid serious injury or death, installation must be in accordance with the
manufacturer’s installation instructions and must comply with the provisions of the National
Electric Code (NEC) and all local codes for the U.S. or must comply with Canadian Electric
Code for Canada. In cases of conflict between local codes and the NEC, local codes shall take
precedence.
Turn off power at the circuit panel before plugging or unplugging the Charging Dock.
Verify that the Power Cord Plug is completely inserted into the receptacle. There
is a potential shock hazard if Plug only partially inserted into the receptacle.
To clean the Charging Dock, wipe the Charging Dock with a clean cloth dampened with water or
a mild detergent solution suitable for use on automobile paint. Turn off power at the circuit panel
before cleaning. Do not use chemicals or solvents. Do not submerge the Charging Dock.
Do not operate your Charging Dock with a visibly damaged output cable or module housing.
Visually inspect the output cable (including the connector) and module housing for damage
before each use. If you detect any damage, stop using the Charging Dock and contact
Customer Support for service.
If, at any time, you think the equipment is unsafe, shut off the electricity at the circuit breaker
or disconnect switch (if applicable) and immediately contact Customer Support for service.
DO NOT use your Charging Dock until the problem is identified and corrected.
DANGER
NOTE
C
H
A
P
T
ER
1
l
G
E
T
T
IN
G
S
TA
R
T
E
D
C
H
A
P
T
ER
1
l
G
E
T
T
IN
G
S
TA
R
T
E
D
DANGER